Dimplex SI 130TU, Installation And Operating Instruction

Page: 32 / 80

EN-12 452237.66.52 · FD 9912 www.gdts.one
English SI 90TU - SI 130TU
12 Device information
1 Type and order code
SI 90TU
2 Design
Heat source Brine
2.1 Model Universal
2.2 Controller integrated
2.3 Thermal energy meter Integrated
2.4 Installation location Indoors
2.5 Performance levels 2
3 Operating limits
3.1 Heating water flow
1 2
°C
20 to 62 ± 2
3.2 Brine (heat source)
1 2
°C
-5 to 25
3.3 Antifreeze Monoethyleneglycol
3.4 Minimum brine concentration (-13 °C freezing temperature) 25 %
4 Flow / sound
4.1 Heating water flow / free compression (max).
Nominal flow in accordance
with EN 14511 at B0...-3 / W35...30 m³/h / Pa
15.1 / 61000
at B0...-3 / W45...40 m³/h / Pa 14.3 / 64000
at B0...-3 / W55...47 m³/h / Pa 8.6 / 78000
Minimum heating water flow m³/h / Pa 8.6 / 78000
4.2 Brine flow rate / free compression (max).
Nominal flow in accordance
with EN 14511 at B0...-3 / W35...30 m³/h / Pa
21.6 / 57000
at B0...-3 / W45...40 m³/h / Pa 19.4 / 67000
at B0...-3 / W55...47 m³/h / Pa 17.1 / 78000
Minimum brine flow rate m³/h / Pa 17.1 / 78000
4.3 Sound power level according to EN 12102 dB(A) 66
4.4 Sound pressure level at a distance of 1m
3
dB(A)
53
5 Dimensions, weight and filling quantity
5.1 Device dimensions
4
H x W x L mm
1890 x 1350 x 750
5.2 Weight of the transportable unit(s) incl. packaging kg 604
5.3 Device connections for heating inches Rp 2½“
5.4 Device connections for heat source Inches Rp 2½“
5.5 Refrigerant / total filling weight type/kg R410A / 23.0
5.6 GWP value / CO
2
equivalent --- / t
2088 / 48
5.7 Refrigeration circuit hermetically sealed yes
5.8 Lubricant / total filling quantity type/litres Polyolester (POE) / 7.3
5.9 Volume of heating water in device Litres 21
5.10 Volume of heat transfer medium in device Litres 21
6 Electrical connection
6.1 Supply voltage / fuse protection / RCD-Type 3~/PE 400 V (50 Hz) / C 80A / A
6.2 Control voltage / fuse protection / RCD-Type 1~/N/PE 230 V (50 Hz) / C 13A / A
6.3 Degree of protection according to EN 60 529 IP 21
6.4 Starting current with soft starter A 53
6.5 Nominal power consumption B0 W35 / max. power consumption
5
kW
18.5 / 35.3
6.6 Nominal current B0 W35 / cos

A / --- 33.4 / 0.8
6.7 Power consumption of compressor protection
(per compressor) W
90 / thermostatically controlled
6.8 Power consumption of pumps kW up to 1.25