Fig. 2
Room Temperature
Set Temperature
Temperature Up
Dimmer Up/Firelight On
Flame Speed Up
Fading Embers On/Timer
Cycle
Purefire
TM
High Speed
Temperature
Down
Dimmer
Down/
Firelight Off
Flame Speed
Down
Slow Start/
Fading
Embers Off
Purefire
TM
Low Speed
Flame & Heat
On/Off
Dimmer Up Control
Flame Speed Control
Slow Start/Fading
Embers Control
Purefire
TM
Speed
Purifire
TM
On/Off
Flame / Heat On/Off Button
Press the “
Flame/Heat On/Off
“button to turn the Flame/Heat
function
On
. When the “
Set Temperature
” is higher then the “
Room
Temperature
” the heat will come on. To turn the heat off, lower the
“
Set Temperature
” so that it’s setting is lower then the “
Room
Temperature
”. The default temperature setting is 72°F (22°C).
NOTE:
When using the remote control the heater runs on a thermostat. Press
the “
Temperature Up
” or “
Temperature Down
” button to adjust the
set temperature. Once the desired set temperature is reached the
© 2008 Dimplex North America Limited
7209210100REV01
Remote Control Functions
(Fig. 2)
