☆
OPERATING INSTRUCTIONS
All of the functions of this fan can be controlled from the “soft-touch buttons on the unit’s control
panel” or by use of “the wireless remote control”
The LED display screen on the control panel of the product illuminates to display what function you
have selected when the fan is operating.
a. Turning on/off the fan
Gently press “Standby” button
on the “soft-touch button control panel” or the “wireless remote
control”.
b. Adjusting and Selecting Speed
3 constant speeds can be selected by pressing the button with the symbol
Each time you press
this button the speed will cycle from I to II to III and either back to Off again if using the product
control or back to ‘I’ if using the remote (which has a separate power button,
where “I” = Low speed , “II” = Medium speed, and, “III” = High speed.
c. Variable Blower Function Selection
If you prefer a variable speed output there are two options available by pressing the button
- Press once and will light up on the control panel to indicate natural breeze selection, this
continuously and randomly cycles the air speed between levels to simulate variable wind
conditions.
- Press again and will light up on the control panel to indicate night time operation selection,
this initially varies the speed automatically but at a less noticeable rate than above.
.
d. Oscillating function.
Your product can oscillate in an arc from left to right and back again continuously thus circulating the
air flow over a wider area. To start the tower fan oscillating simply press the oscillation button
Press this button a second time to stop the oscillation.
d. Runback Timer function
The product can be set to switch off automatically after running for one of four user selectable
runback periods i.e. 1 hr, 2 hr, 4 hr or 8 hr.
To activate the runback function just simply press the timer button
- Press once and the timer is set to 1hr runback
- Press twice and the timer is set to 2hrs runback
- Press 3 times and the timer is set to 4hrs runback
- Press 4 times and the timer is set to 8 hrs runback
- Press a 5th time and the timer function is switched off.
REMOTE CONTROL
Your remote control comes complete with a CR2025 3V battery fitted.
To replace the battery simply unclip and remove the battery cover on
the back and replace the battery, then carefully refit the cover and
snap into place.
