EN-4
2.2
English
NOTE
Tampering, removal, lack of the identification plate or other does not
allow the safe identification of the product and will make any installation
or maintenance operation to be performed difficult.
2.2 Safety precautions and
regulations
NOTE
The heat pump must be installed by a qualified and suitably trained
Engineer in accordance with the current legislation
NOTE
Dimplex will not assume any responsibility for damage due to failure to
follow these instructions. Before beginning any work, READ THESE
INSTRUCTIONS CAREFULLY AND CARRY OUT THE SAFETY CHECKS.
All the staff involved during installation must have thorough knowledge
of the working and any dangers that may arise during installation.
ATTENTION!
The refrigerant circuit is under pressure and can operate at very high
temperatures. The refrigerant circuit must only be maintained by a
qualified refrigerant engineer.
ATTENTION!
The heat pump is delivered with a sufficient quantity of R407C refrigerant
for operation. This refrigerant is chlorine-free and does not damage the
ozone layer. R407C is not flammable. However, all maintenance
operations must be carried out exclusively by a specialised refrigerant
engineer using suitable protective equipment.
Danger of electrical discharge! Before opening the
heat pump, completely disconnect the appliance
from the power mains.
3 Receiving the product
3.1 Movement
Before handling the unit, please make note of the dimensions,
weights, centre of gravity and lifting points; then verify that the
equipment to be used for lifting and positioning is adequate and
complies with the safety regulations in force. Pay special atten-
tion to the loading, unloading, and lifting operations to avoid any
danger to people or damage to the casing or components of the
heatpump. It is strictly prohibited to place objects on top of the
unit. The handling staff must be provided with suitable individual
protective equipment. It is strictly prohibited to stand below the
unit, during lifting.
3.2 Position
LAB must be installed outdoors in a suitable site that provides ac-
cess for all the necessary maintenance. The device should al-
ways be installed on a permanently smooth, even and horizontal
surface capable of bearing the weight of the machine. The entire
frame should lie directly on the ground to ensure a good sound-
proof seal and to prevent the water-bearing components from be-
coming too cold. If this is not the case, additional insulation
measures may be necessary. It must be possible to carry out
maintenance work without hindrance. This is ensured if the clear-
ance displayed below is maintained. If the heat pump is installed
in partially windy areas, a windbreak should be provided to avoid
erratic operation of the fan.
NOTE
The appliance must be installed in such a way as to make maintenance
and/or repairs to be carried out possible. The appliance warranty does
not cover the costs for ladder trucks, scaffolding, or other elevation
systems that may become necessary for carrying out servicing under
warranty.
/$%0²0²0
$1)
+$1'/,1*(;$03/(