OPERATING THE HEATER
The heater has two switches which control the temperature settings
The Heat selection switch
This switch has five settings
The Thermostat switch
This switch moves the thermostat settings from low to high and
will only operate if position or
have been selected on the
heat selection switch.
To operate, set the heater switch to
or
and turn the
thermostat switch to high, this will give the most warmth.
When the temperature reaches the desired level, turn the
thermostat toward low until you hear a click. This sets the heat
output of the heater to your desired temperature.
The elements will automatically turn back on when the room
drops below the desired temperature and will switch off when
the room reaches the set temperature.
REMEMBER THE FIRST TWO ELEMENTS WILL REMAIN ON
UNTIL THE HEATER SWITCH IS TURNED OFF. THE
THERMOSTAT ONLY FUCTIONS WHEN EITHER THREE OR
ALL ELEMENTS ARE ON.
This switch has five settings
OFF
Turns all the heating elements off
One heating element on
600W
Two heating elements on
1200W
Three heating elements on 1800W
Four heating elements on
2400W
