Charging Mode
Connect the small connector of the USB cable to the USB socket on the fan
and connect the large connector to a suitable (maximum) 5V charging unit (not
supplied). A typical laptop or computer USB port can be used or a suitable plug
adaptor – NB – please check the plug output rating to ensure it is a maximum
output of 5V/1A, connecting the fan to a higher charging output will damage the
unit. Please check the output rating of the charging socket before use.
When the charging unit is switched on (with the fan in off mode) the LED lights will
flash to indicate the amount of power/charge in the battery as follows:
1. When the battery power detected is ≤ 25%, Light 1 will flash slowly on & off
(interval approx.1 second).
2. When the battery power detected is between 25% and 50%, Light 1 will stay
on, Light 2 will flash slowly on & off (interval approx.1 second).
3. When the battery power detected is between 50% and 75%, Light 1 & 2 will
stay on, Light 3 will flash slowly on & off (interval approx.1 second).
4. When the battery power detected is between 75% and 100%, Light 1, 2 & 3 will
stay on, Light 4 will flash slowly on & off (interval approx.1 second).
5. When the battery power detected is 100% (fully charged), Light
1, 2, 3 & 4 will stay on.
NB - Charging & Working Duration:
1. Charging period when the battery is fully discharged will take 7 hours using a
5V/1A adaptor to fully charge the fan.
2. Working duration unplugged is from 4 hours in High speed mode to 15 hours in
Quiet speed mode.
There is one electronic push button positioned on front of the LED lights.
1) Short Press Operation sequence:
When it is off with the charging cable disconnected
• Press the button once and it will switch on in Quiet mode and indication light 1
will come on.
• Press the button again and it will switch to Low speed mode and indication
light 2 will come on.
• Press the button again and it will switch to Medium speed mode and
indication light 3 will come on.
• Press the button again and it will switch to High speed mode and indication
light 4 will come on.
•
Press the button again and it will switch Off and all lights will go out (when the
charging cable is not connected).
2) Long Press Operation:
Press the button for 1.5 seconds or more when the product is running at any
speed and the appliance will turn off immediately without going through the short
press sequence above.
Operation
