2
3
13. When the supply cord is damaged, it must be replaced by the
manufacturer, or a professional service agent only.
14. Please keep the product from the wall or overhanging objects
e.g. curtains at minimum 50cm distance.
15. Unplug the appliance before cleaning.
16. When the unit stops, you have to wait for 3 minutes before you can
restart the unit to protect the compressor from damage
OPERATING INSTRUCTION
1. Control panel
2. Air outlet
3. Handel
4. Front housing
5. Air Inlet / Back housing
6. Drain hole
7. Water tank
CONTROL PANEL DESCRIPTION
OPERATING INSTRUCTION
STARTING THE UNIT
1. Firstly, turn the humidity control switch to the “OFF” position.
2. Plug in the dehumidifier.
3. Turn on the humidity control switch (clockwise) and turn the same
switch to the reading of the desired humidity (60% in general as shown
on position
“
4
”
).
TURNING OFF THE UNIT
1. Turn the humidity control switch fully anticlockwise to the “OFF”
position and the power supply is cut off and the unit stops operating.
2. If the dehumidifier is not in use for a long time, please disconnect the
power cord plug from the supply outlet.
NOTES AND PRECAUTIONS
1.
The dehumidifier will not operate if the humidity setting is higher than the
ambient humidity.
2.
When the water tank is full an automatic float switch shuts down the product
and the tank full LED illuminates. Remove the water storage tank and empty
its contents, carefully replace the empty water tank back in position, the unit
will now automatically restart operating.
3.
The following table indicates the approximate relative humidity settings
against its related position number on the humidity control switch:
4. The operational temperature range for this unit is 5-32
℃
.
CONTROL SWITCH
POSITION NO.
APPROXIMATE
HUMIDITY SETTING
Cont.
Continuous
running
8
20
﹪
7
30
﹪
6
40
﹪
4
60
﹪
2
80
﹪
