13
Maintenance
Cleaning the Heater
Ensure the unit is unplugged and has cooled completely before cleaning the unit.
Use a damp cloth to clean the glass and surfaces of the heater. Do not use any harsh cleaning agents or
abrasive materials.
It is recommended that you clean the heater every 3 months to maintain optimal function and appearance of the
heater. Additional cleaning and maintenance is recommended if the heater is installed in a corrosive environment
or exposed to chemicals in the atmosphere such as those from cigarette smoke and pollution to prevent wear and
tarnish of the heater.
WARNING
• Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electric shock or
damage to persons.
• Do not attempt to service or clean heater while unit is operating, as there is a hazard from electric shock, and
injury potential from hot heating elements.
• To avoid the risk of burn or injury wait a minimum of 30 minutes for the heater to cool before attempting to
clean or service.
• There are no user-serviceable parts inside the heater. Any servicing other than cleaning of the heater should be
performed by an authorized service representative.
• Never immerse the appliance in water!
Remote Control Battery Replacement
1. Slide the battery cover open on the remote control.
2. Install 2 AAA batteries in the battery compartment.
3. Close the battery cover.
Battery must be recycled or disposed of properly. Check with your Local
Authority or Retailer for recycling advice in your area.
Battery Cover
Battery Cover
