11
the thermostat knob counter-
clockwise until you hear a click.
Leave in this position to maintain
the room temperature at this
setting. For additional heat, turn
clockwise until you hear the click
again and the heater will turn on.
Resetting The
Temperature Cutoff
Switch
should the heater overheat, an
automatic cut out will turn the
fireplace off and it will not come
back on without being reset. It
can be reset by switching the
main on/oFF switch to oFF and
waiting five (5) minutes before
switching the unit back on.
CAUTION:
If you need to
continuously reset the heater,
disconnect power and call
Dimplex customer service at
1-888-DImPLEX (1-888-346-
7539).
Remote Operation
The fireplace is supplied with an
integrated on/off remote control
!
NOTE: Ensure that the
fireplace Main ON/OFF
switch is set to the remote
control setting.
To operate, push the on button
to turn fireplace on, push the oFF
button to turn the fireplace off.
Battery Replacement
(Figure 5)
To replace the battery:
slide battery cover open on
1.
Operation
Figure 4
A
B
C