6
OPERATION
1. Place the fan on a flat stable surface. Plug into an electrical outlet and
press the “Power On/Off” button to turn the unit “On”. The current room
temperature will show on the LED display.
2. Adjust the fan speed by pressing the “Speed” button. There are three
speeds - Low, Medium & High and each press will cycle through the
speed settings. The speed setting will show on the LED display.
3. Press the “Mode” button to cycle through, Normal (NM), Natural (NT) &
Sleep (SL) modes. The indicator light of the chosen mode will illuminate
on the LED display.
4. This unit has a 12 hour timer that can be set in 0.5 hour increments.
Press the “Timer” button until the desired time is shown on the LED
display.
5. Press the “Oscillation” button to enable oscillation. Press again to
disable.
6. This fan has an adjustable tilt feature of up to 7°. Gently pull the top of
the fan backward to tilt (ref. below diagram). Push the fan forward to
remove the tilt angle.
