8
ATTENTION:
PLEASE READ THIS MANUAL CAREFULLY BEFORE CONNECTING DEVICE
TO THE POWER SUPPLY. CHECK THE VOLTAGE MATCHES THE UNIT RATING
BEFORE OPERATING.
(RATED ELECTRIC POWER: 220~240V; 50 Hz).
STANDBY MODE
Once plugged in, the device will beep once indicating standby mode.
POWER ON/OFF
Once in standby, press the
ON/OFF
button to turn on. The fan will default to the
lowest speed (1/7), with no timer or oscillation. To switch off, press the
ON/OFF
again.
CHANGE FAN SPEED
To change the speed, press the
FAN SPEED
button until desired fan speed is
selected. There are seven (7) speeds in total, with seven being the highest. The
LED screen will indicate the current speed level.
SET THE TIMER
Press the
TIMER
button to select your desired length of operation. Press once to
select 1hr, and twice to select 2hrs and so on. You may select up to 12 hours. The
selected time will show on the LED display panel. The device will automatically
power off after the duration is met.
CHANGE MODE
Press the
MODE
button to change from Normal > Natural > Sleep
NORMAL MODE:
Fan speed will run as per the user’s setting, at the manually
selected fan speed.
NATURAL MODE:
Fan speed will change automatically in a set time interval to
mimic a natural breeze effect.
SLEEP MODE:
Fan speed will fluctuate automatically in a set time interval to
provide a comfortable sleeping environment. Under sleep mode operation, three
fan speeds are available dependent on the original fan speed selected:
A. High speed: Fan will operate on high level natural wind for 30mins and then
reduce speed to medium for a further 30mins. The fan will then operate at
the lowest fan speed for the duration of operation.
B. Medium speed: Fan will operate on a medium level natural wind for 30mins
and then switch to low speed.
C. Low: Fan will operate with low level natural wind until it is switched off.
Operation
15429_Dimplex DCTFDCP97 Manual.indd 8
15429_Dimplex DCTFDCP97 Manual.indd 8
7/09/20 4:19 PM
7/09/20 4:19 PM
