13
BODY SENSOR FUNCTION
OPERATING THE BODY SENSOR
The body sensor function will be the default setting when turning on the Intellifan
if there is no pre-saved function from last use (see “Extra Features / Saved
Functions” section for more information about “SAVED FUNCTIONS”).
To manually activate the body sensor function, press and hold (for approx.
3 seconds) the HORIZONTAL OSCILLATION button until it BEEPs twice. All four
horizontal oscillation LED indicators will light up in turn.
The Intellifan will now rotate 360° to detect people within 2 meters of the Intellifan
and determine the suitable rotational arc. The Intellifan will BEEP when it detects
people. It may also perform an additional 360° degree turn to verify the location
of the people in the room. The Intellifan will then adjust its rotation to only the
area where people are located.
If no one is detected, the Intellifan will oscillate through 360° again searching
for people.
The Intellifan will recalibrate its rotation if people move from their original
locations.
Note that the Intellifan will not track people as they move around the room.
If people move frequently around the room, consider using one of the
pre-programmed angles of rotation.
To turn off the body sensor, press the HORIZONTAL OSCILLATION button.
Summary of Contents for DCPFS1
Page 18: ......
