Operation
Note:
You will hear a beep sound for every press of the button on the fan or remote
control. This cannot be turned off.
Remote Control Operation
1.
Turn the fan On/Off by pressing the On/Off button.
2. Press the speed increase '+' & decrease '-' buttons to cycle through the speed
settings from 1-9. The selected speed setting will appear on the LED display.
3. The strong wind mode can only be turned on via the remote control. When this
mode is activated a 'H' will appear on the LED display screen. Press the speed
increase '+' or decrease '-' button to exit this mode.
4. The sleep mode can only be turned on via the remote control. When the sleep
mode button is pressed an 'L' will appear on the LED display screen. Press the
speed increase '+' or decrease '-' button to exit this mode.
5. Press the oscillation button to begin oscillation. Press the oscillation button again
to cancel oscillation.
6.
This tower fan is equipped with a 1-8 hour auto off timer. Press the timer button
to set the timer in 1 hour increments, . The set time will briefly appear on the LED
display. To cancel the timer, cycle through the hours set until '0' shows on the
display. Other settings can still be used when a timer is set.
LED Display Operation
Some functions can be operated by pressing the LED Display. To have full use of all
functions, please use the remote control.
1. Turn the fan On by pressing the LED Display screen for 1 second until you hear 1
beep. The fan will start working in the previous settings. To turn the fan off, press
and hold the LED display screen for 2 seconds until 2 beeps sound.
2. When the fan is already on, press the LED Display for 1 second to start oscillation
- 1 beep will sound. To stop oscillation, press the LED display for 1 second and the
fan will beep once and stop oscillating.
3.
To adjust the fan speed, briefly touch the LED Display to cycle through the
desired speed settings, a beep will sound for every speed change. The speed
setting will display on the screen.
NOTE:
The LED Display turns off after 20 seconds. The display is activated again as
soon as a button is pressed.
9
