Dimplex DCEVP8BW, Instruction Manual

Page: 9 / 16

Functions
TIMER
The
TIMER
can be set in 1 hour increments up to the maximum timer of 9 hours. The
set time will be indicated on the display panel and the time indicator turns on and
the display panel flashes to display the set time, indicating that it is in the timer
setting state. At this moment, you can press the timer button to set the time, and
press any key (except the switch key) or wait 5 seconds to exit the setting. After
setting the timer, the display panel alternately displays the set timer and current
wind speed at 10 second intervals, and the wind speed indicator and time indicator
display correspondingly. When the internal timing program reaches the set time, the
machine will shut down and stay in standby state.
MODE
The default mode after turning “On” is normal. Press this button to select modes
in this sequence: normal > natural > sleep. The
MODE
indicator light will illuminate
accordingly. There is no indicator for the normal wind mode.
Normal
: The fan runs at a fixed speed for the wind speed selected, without any
change.
Natural
: The fan motor runs irregularly according to the preset program, and can be
set to low, medium and high natural wind in conjunction with the wind speed key.
Natural wind is to imitate the effect of natural wind, making the air volume softer
and more comfortable.
Sleep
: In natural sleep mode, the wind speed changes with a 30-minute cycle
change, but does not indicate with the change of natural wind. The fan motor
performs timing downshifting operation mode according to the wind speed set by
the user and preset rule of the program. This mode prevents physical discomfort
due to excessive wind when people fall asleep.
High
: 30 minutes high speed natural wind > 30 minutes medium level normal
wind > 30 minutes low level normal wind (until turned off).
Medium
: 30 minutes medium level normal wind > low level normal wind (until
turned off).
Low
: Low level normal wind (until turned off)..
COOLER / HUMIDIFIER
Press this button once to turn on the
COOLER / HUMIDIFIER
function, the pump
will start and the
COOLER / HUMIDIFIER
LED will illuminate. Press this button again
to turn off the cooling function, and to use as a fan only.
9