Slide pump
paddle to the
bottom
Remove
stopper
Assembly
IMPORTANT!
First remove the pump paddle stopper as shown below, then slide the pump
paddle to the bottom. This is so the pump extends down into the tank for cooling/
humidification.
Note: The buzzer beeps twice when the power supply is first turned on. The unit
is in ‘standby’ until the On/Off button is pressed.
ON/OFF
Press the
ON/OFF
button to turn the unit
ON
. The default settings when first turned
on are; medium fan speed, normal mode, and no timer.
To turn the unit
OFF
press this button again. The unit may take a few seconds to
power off completely.
FAN SPEED
The
FAN SPEED
can be selected in the following sequence: silent > low > medium >
high. The selected fan speed LED indicator light will illuminate accordingly.
COOL / HUMIDIFY
Press this button once to turn on the
COOL / HUMIDIFY
function, the pump will
start and the
COOL / HUMIDIFY
LED will illuminate. Press this button again to turn
off the cooling function, and to use as a fan only.
Functions
8
