13
Setting the thermostat
The thermostat
A
should be set to the comfort level
required. Turning the knob clockwise will increase the room
temperature selected, but the actual setting to provide the
required conditions will be found by experience. If, when the
convector heater is switched oN and available for use, the
room temperature is below that set on the control, the neon
C
will be illuminated, showing the heater elements are
being used.
14
24-hour convector operation
In certain circumstances it may be desirable for the
convector to be available during the off-peak period. If this
is so the installer can select this option during installation,
however, the user should be aware of the following:
1. If the convector heater is not required during the off-peak
period the user must remember to switch it off
F
.
2. If the convector heater is used at a high level for a
significant period during the off-peak period it will have the
effect of reducing the level of charge taken by the storage
heater for a given input setting. A higher setting of the input
control may be required to compensate for this.
1
2
3
4
5
6
7
A
1
2
3
4
5
6
7
1
2
3
4
5
6
7
F
7
C
13
14
1224-CXLSN_STORAGE HEATER INSTRUCTIONS.indd 8
14/01/2011 10:29
