Important Safety Advice
When using electrical appliances, basic precautions
should be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following:
If the appliance is damaged, check immediately with
the supplier before installation and operation.
Do not use this appliance in the immediate surround-
ings of a bath, shower or swimming pool.
Do not use outdoors.
This appliance must not be located immediately
above or below a fixed socket outlet or connection
box.
WARNING
: The appliance carries the
Warning Symbol indicating that it must not be
covered or has a Do not cover label. Do not
cover or obstruct in any way the heat outlet
grille located underneath the appliance Overheating
will result if the appliance is accidentally covered. Do
not place material or garments on the appliance, or
obstruct the air circulation around the appliance, for
instance by curtains or furniturne, as this could cause
overheating and a fire risk.
In the event of a fault unplug the heater.Unplug the
appliance when not required for long periods.The
supply cord must be placed on the right hand side of
the heater away from the heat outlet underneath the
appliance.
Although this appliance complies with safety stand-
ards, we do not recommend its use on deep pile
carpets or on long hair type of rugs.
This appliance can be used by children aged form 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experinence
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintaince shall not be made by Children without
supervision.
Children of less than 3 years should be kept away
unless continuously supervised. Children aged from
3 years and less than 8 years shall only switch on/
off the appliance provided that it has been placed or
installed in its intended normal operating position and
they have been given supervision or instruction con-
cerning use of the appliance in a safe way and under-
standing the hazards involved. Children aged from 3
years and less than 8 years shall not plug in, regulate
and clan the appliance or perform user maintaince.
The appliance must be positioned so that the plug is
accessible.
If the supply cord is damaged it must be replaced by
the manufacturer or service agent or similarly quali-
fied person in order to avoid a hazard.
CAUTION
: In order to avoid a hazard due to
inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external
switching device, such as a timer, or connected to a
General
Unpack the heater carefully and retain the packaging for possible
future use, in the event of moving or returning the fire to your supplier.
These models are designed to be free standing and are normally
positioned against a wall.
The fire incorporates a flame effect, which can be used with or without
heating, so that the comforting effect may be enjoyed at any time of
the year. Using the flame effect on its own only requires little electricity.
A choice of 1kW or 2kW heat output is provided by the fan heater,
which is located at the bottom of the unit.
Before connecting the heater check that the supply voltage is the same
as that stated on the heater.
Please note: Used in an environment where background noise is
very low, it may be possible to hear a sound which is related to the
operation of the flame effect. This is normal and should not be a
cause for concern.
Electrical connection
WARNING – THIS APPLIANCE MUST BE EARTHED.
This heater must be used on an AC ~ supply only and the voltage
marked on the heater must correspond to the supply voltage.
Before switching on, please read the safety warnings and operating
instructions.
Controls
- see
Fig. 2
These switches provide a choice of heat settings, The appliance
is in standby mode when the mainslead is plugged in. This
is indicated by the red neon behind the flame effect screen.
The two selector switches are in the ON position when the side with
the markings on (i.e.
I
, or
II
) is pushed in.
Selector switch 1 (0) Controls the electricity supply to the
appliance and flame effect. Press for ‘ON’
and ‘Standby’. If both selector switches 2 and
3 are in the OFF position, the product works
on flame effect only.
Selector Switch 2 (I) Provides 1kW heat output
Selector Switch 3 (II) Provides 2kW output with switch 2
Remote control
- see
Fig. 6
The maximum range of use is ~ 6metres.
Warning: It takes time for the receiver to respond to the transmitter.
Do not press the buttons more than once within two seconds for
correct operation.
Battery information
- see
Fig. 6
1.
Slide open the battery cover on the back of the remote
control
2.
Install AAA batteries into the remote control
3.
Replace the battery cover.
Discard leaking batteries
Dispose of batteries in the proper manner according to provincial and
local regulations.
Any battery may leak electrolyte if mixed with a different battery type,
if inserted incorrectly, if all the batteries are not replaced at the same
time, if disposed of in a fire, or if an attempt is made to charge a battery
not intended to be recharged.
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
1
4
5
2
3
6
- Club Stove, CLB20 -Courchevel Stove, CVL20
- Ritz Stove, RIT20
NZ
AUS
circuit that is regularly switched on and off by the
utility.
This appliance is not equipped with a device to
control the room. Do not use this heater in small
rooms when they are occupied by persons not
capable of leaving the room on their own, unless
constant supervision is provided.
The appliance must not to be located beneath a
socket outlet.
CAUTION
- Some parts of this product can become
very hot and cause burns. Particular attention has
to be given where children and vulnerable people
are present.
