11
PowerChef
®
Convertible Operation - Program Mode
Food is placed and hood is closed.
Touch the Select
button.
Place Food Indicator disappears,
INTERVAL TIME
reads time to end of next
stage and
TOTAL TIME
continues to count
down.
Power Level goes to set program level.
Cooking is underway.
Alarm sounds.
INTERVAL TIME
ends,
TOTAL TIME
stops
and Turn Food Indicator flashes.
Grill is indicating it is time to turn
food over. Open hood, turn food and
close hood again.
Food is turned and hood is closed.
Touch the Select
button.
Turn Food Indicator disappears,
INTERVAL
TIME
ends and
TOTAL TIME
continues to
count down.
Cooking of reverse side of food is
underway.
Alarm sounds.
Both
TOTAL TIME
and
INTERVAL TIME
ends. Cooking Complete Indicator flashes.
Power Level reduces to low heat.
Food cooking program has
completed. Food is ready.
Touch the Cancel
button.
TOTAL TIME
displays
CANC.
Display is waiting for confirmation to
end program.
Touch the Cancel
button a
second time.
Display returns to the start-up screen.
Grill and display are ready for the
next program.
Turn Main On/Off Switch to the
“ O “ position.
Screen is blank.
Grill is off.
WARNING:
Grill is always on and heated when Main On/Off Switch is in the On (“ I “) position. Heat will remain at low
setting until: a cooking action is selected; the switch is turned to the Off (“ O “) position; or the grill is unplugge.
Pause
Pressing the Pause button at any time during a timed
stage or cooking mode will reduce the heat to low and will
pause and flash the timer until the Pause button is pressed
again.
!
NOTE:
All program cooking times assume food is thawed
before cooking (except hamburger patties).
Back Button
The Preheat stage can be skipped at any time by pressing
the Back
button once.
Cancelling a Program
Any program can be cancelled by pressing the Cancel
button twice. Pressing once will display CANC in the
Total Time Counter area, a second pressing within four
(4) seconds will have the grill cancel the program entirely,
reduce to low heat setting, and the display return to the start-
up selection screen.
