Dimplex Braemar Optiflame 3D BMR20 Series, Operating Instructions Manual

Page: 3 / 12

The fire incorporates a flame effect, which can be used with or without heating, so that the
comforting effect may be enjoyed at any time of the year.
A fan heater can provide heating in cold weather. A distance of 1 metre (3 feet) must be maintained
between the front of the heater and any surrounding furniture, overhanging curtains or other
obstructions.
To reduce heat loss and to prevent any chimney up draft affecting the operation of your inset fire,
we recommend that the chimney flue is sealed off.
Always ensure that the appliance is sitting on a level surface.
Before connecting the appliance, check that the supply voltage is the same as that stated on the
appliance.
Please note: Used in an environment where background noise is very low, it may be possible to
hear a sound which is related to the operation of the flame effect. This is normal and should not
be a cause for concern.
Technical Information
Model No:
Braemar
BMR20BR, BMR20CH, BMR20AB, Dumfries DMF20BR, DMF20CH,
DMF20AB,DMF20BL Glencoe GLN20BR,GLN20CH Torridon TRR20CH Portree POR20CH
With electronic room temperature control.
Thank you for choosing a Dimplex electric fire.
General Information
Heat Output 230V 240V
Nominal Heat Output
P
Nom
1.7 1.8 kW
Minimum Heat Output
P
min
0.9 1.0 kW
Maximum Continuous Heat Output
P
max
1.7 1.8 kW
Auxiliary Electricity Consumption
In Standby Mode
P
Nom
0.02 0.02 W
Caution:
Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present. This instruction
can be found at www.dimplex.co.uk
Warning:
In order to avoid overheating, do not cover the appliance. Do not place material or
garments on the appliance, or obstruct the air circulation around the appliance, for instance by
curtains or furniture, as this could cause overheating and a fire risk.
The appliance carries the Warning Symbol indicating that it must not be covered or has a
Do not cover label. Do not cover or obstruct in any way the heat outlet grille located below
the flame window on the appliance Overheating will result if the appliance is accidentally
covered.
Warning:
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the utility.
Dimplex Optiflame 3D Inset Fire
Models: BMR20, DMF20, GLN20, TRR20, POR20
3