L1
L2 or N
gND
L1
L2 or N
Line
L1
L2 or N
ground
Line
rigHT SiDE POWEr COnnECTiOn
left SIde PoWer coNNectIoN
L1
L2 or N
ground
WiTH SingLE POLE THErMOSTaT
For Right hand side connection use same logic.
L1
L2 or N
ground
WiTH DOUBLE POLE THErMOSTaT
For Left hand side connection use same logic
Load
ground
!
Note:
When control accessories are installed, use wiring diagram supplied with the accessory. Following are examples of wiring
diagrams with thermostat.
coNNectING multIPle lINear coNvectorS toGetHer
3
In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2011 Dimplex North America Limited
1367 Industrial Road Cambridge ON Canada N1R 7G8
1-888-346-7539 www.dimplex.com
WIrING INStructIoNS
CAuTION: Do not bypass or eliminate thermal cutout from the circuit.
CAuTION: Check tightness of all electrical connections and wire nuts.
CAuTION: grounding connection is required. .
LEgEnD:
Thermal cutout
Heating element
Wire nut connection
ground
Thermal cutout
Nameplate
Wire nut connection
ground
Heating Element
factorY WIrING
