Maintenance
WARNING: ALWAYS DISCONNECT FROM THE POWER
SUPPLY BEFORE ATTEMPTING ANY MAINTENANCE.
Lamp replacement
To gain access to the lamps, open the firebox door, remove
the two screws securing the fuel effect assembly (see Fig.5).
Slide out the fuel effect assembly. (See Fig. 5).
Carefully rotate the lamp anti-clockwise until it comes out
of its holder (see Fig. 6).
Replace the defective lamp with a 24OV, 40 watt E14 SES
clear candle lamp, rotating the lamp clockwise in the
holder until it is fully home. Do not over tighten.
Refit the fuel effect complete with fixing screws, ensuring that
the rear edge locates under the glass viewing screen, (see
page 1).
Cleaning
For general cleaning use a soft clean duster or, if necessary, a
damp cloth
never use abrasive cleaners.
The fuel effect can be cleaned with a soft brush or vacuum
cleaner.
The glass viewing screen should be cleaned carefully with a
chamois leather. DO NOT use proprietary glass cleaners.
After sales service
Your product is guaranteed for one year from the date of
purchase.
We undertake to exchange or repair free of charge within this
period, any part, with the exception of a lamp bulb, found to be
defective due to a manufacturing fault.
All
enquiries for service should be directed in the first instance
to the retailer from whom your product was purchased.
Please do not initially return a faulty appliance or part of an
appliance to us as this may result in transit damage and/or
delay in providing service. Let us know your difficulty quoting
the model number and series letter of the appliance. We
will
then take the appropriate action.
The product complies with the Australian/New Zealand Safety Standards AS/NZ S 335.2.30:2002 and also the European Standard
Electromagnetic Compatibility
(EMC) EN 55 014-1:1993, EN 61000-3-2:1995, EN 61000-3-3:1995, EN 55 014-2:1997 which
cover the essential requirements of EEC Directive 89/336/EEC.
Fig.5
Fig.6
