Dimplex 5011139081148, Instruction Manual

Page: 20 / 40

The remote control off ers the facility to select the heat output from the appliance
between
HI , LO heat and FAN settings. HI heat is set by default. This is a global heat
setting and once set all other operational modes will operate with this setting.
In order to set/change the heat setting,
• From the home screen press and hold the ADV button for 2 seconds. The remote
will enter the heat selection screen.
• Use the arrow keys to navigate to the desired setting and confi rm using the
ENTER key. The FAN is on a separate screen that is accessed by continuously
pressing the arrow keys.
• The remote will return to the home screen and all heating modes will function
with the selected heat output.
NOTE:
If FAN output is selected FAN will be visible on the home screen instead of time.
Heat Output Selection
NOTE:
The HI temperature setting will modulate the heat output to optimise the effi ciency
of the product. As the room temperature approaches the set-point the heater will
automatically switch to the LO heat setting.
20