14
HFPI9280,
DFPI2311
If the unit was operating prior to servicing allow at least 10 minutes for light bulbs and
heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.
TO REPLACE THE REMOTE CONTROL CIRCUIT BOARD
1. Remove the glass doors and trim from the unit and remove it from the opening.
2. Unscrew the screws located in the middle of the top and the two screws at the back of
the top.
3. Remove the top being careful not to damage any of the attached wiring.
4. Locate the remote control circuit board mounted to the back of the unit and remove
the wiring connections noting their original locations.
5. Depress the ends of the four plastic mounting posts with pliers.
6. Remove the remote control circuit board from the unit.
7. Properly orientate the replacement circuit board and connect all of the wiring clips
connections in their original locations.
8. Reassemble in the reverse order as above.
