Dimension One Spas @home Dream HP, Owner'S Manual

Page: 19 / 28

2002 @ Home Hot Tubs
Owner’s Manual
Do not attempt to remove the light housing cover without the special tool. If you are not able to
locate it, contact the Dimension One Spas’ Service Department to have one sent.
Be sure the O-ring is not damaged and is properly in place when replacing the lens. Contact
Dimension One Spas if a replacement O-ring is needed.
A Dynamic L.E.D. Light is available as an optional accessory for many models. This light is
preprogrammed with 13 different light shows. This light is also replaced in the same manner as
described in the previous paragraph. Contact your dealer or visit our Virtual Showroom at
http://d1spas.com to see if it is available for your model.
Care for the Hot Tub Surface – Ultralife and Granitech
Your hot tub has a very high quality finish. Stains and dirt will generally not adhere to the surface. We recommend
cleaning the entire shell surface with Dimension One Spas’
Water Line Cleaner
.
You may also use Dimension One
Spas’ ph/Alkalinity Increaser or mild cleaners like Soft Scrub. Be sure to thoroughly rinse the shell. After cleaning,
you will want to restore your hot tub shell’s original luster by using Dimension One Spas - Poli-Gloss .
Do not use “409” type cleaners or other caustic solutions as they may damage the hot tub shell
surface and void the warranty. If you are using baking soda to clean your hot tub shell, be careful
not to get it on the skirt. It may bleach the wood.
Do not use citrus-based cleaners on the shell surface.
Granitex

/Quarite Plus

If your spa is equipped with this material you must keep the spa covered when it is empty. When the spa is empty and
the cover is not in place, and the spa is exposed to direct sunlight, it is vulnerable to ultraviolet light or solar damage.
Temperatures generated by sunlight can become concentrated in the shell surface causing the shell material to
delaminate from the urethane backing.
Dimension One “ EnviroTect” Skirts and Vinyl Covers
The Dimension One EnviroTect skirts are unaffected by most corrosive substances, and will not absorb moisture.
To maintain the original finish, clean with soap and water. No sealing or painting is required. To maintain a “nearly
original” appearance we recommend applying
303 Protectant at least once a month on the Dimension One
EnviroTect skirts and on the vinyl spa covers if they are exposed to direct sunlight. 303 Protectant is rated at 40
SPF (Sun Protection Factor).
Care for the Wood Hot Tub Cabinet
When properly cared for, the wood cabinet of your hot tub will maintain its beauty for many years. All woods react
differently to the elements by expanding and contracting. To protect your beautiful wood finish, re-stain it every 3-6
months with Dimension One Spas’
Redwood or Coastal Gray Stain , which serves as a good sealing agent for the
wood. Please note that the cabinet is not warranted against reaction to natural weather conditions. The wood must be
properly maintained. Should your hot tub cabinet require re-conditioning, try Dimension One Spas’Wood Refurbishing
Kit.
15