26370450_V_1_0.DOC
9/10
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
OVERVIEW
OPERATION
Install the device on a plane surface.
The device has no ON/OFF switch. As soon as you insert the jack into the IN socket, it beginns
running. Remove the jack from the IN socket when the device is not in use. This extends the life of the
battery.
Operation via the optional power-unit
Connect the connection cable of the power-unit with the DC IN-socket. Plug the power unit into your outlet.
Inserting/Replacing the battery
Please refer to the explanations under Operating Determinations.
Loosen the screws on the underside of the device and remove the base.
1. 9 V Input Socket
Plug in your AC adapter here.
2. Power Indicator
Indicates ON/OFF status.
3. LED Meter
Indicates to what degree the instrument’s tone
deviates from the reference tone. The center LED
lights up when the tone’s pitch is correct.
4. Battery Indicator
Change the battery, when this LED lights up.
5. Note Display
6. Input Socket
Plug in your instruments, effect unit, etc. here.
7. Output Sockets
Plug in your amplifier here.
OUT2: When the tuner is activated (footswitch
pressed) the output is muted. This way, you can
silently tune your guitar or bass.
OUT1: Always sends signals to your amp
independently of the footswitch position.
9. Footswitch
Turns the effect ON/OFF.
