www.dimavery.com
11
OPERATING ELEMENTS & CONNECTIONS
1 Top panel
2 Rear panel
3 Input jack
6.3 mm jack for connecting an E-guitar.
4 Control BASS
To boost or lower the low frequencies (±15
dB).
5 Control MIDDLE
To boost or lower the middle frequencies (±15
dB).
6 Control MID FREQ
To adjust the control range of the middle
frequencies (200 Hz to 5 kHz).
7 Control TREBLE
To boost or lower the high frequencies (±15
dB).
8 Power switch
9 Selector button A/B
Button not pressed: The clean channel is
activated (LED A lights).
Button pressed: The overdrive channel for
distorted sound is activated (LED B lights).
10 Control VOLUME A
To adjust the volume of the total signal in the
clean channel.
11 Control GAIN
To adjust the distortion rate of the overdrive
channel.
12 Control VOLUME B
To adjust the volume of the total signal in the
overdrive channel.
13 Control CHORUS
To adjust the chorus effect.
14 Control DELAY
To adjust the delay effect.
15 Mains cable
For connection to a mains outlet (230 V~, 50
Hz).
16 PHONE jack
6.3 mm jack for connecting stereo
headphones; switches the internal speaker
off.
17 Control CD VOLUME
To adjust the volume of the line input.
18 CD INPUT jacks
RCA jacks for connecting audio units with line
level (e.g. CD player, mixer).
19 Control TONE
Tone control for the microphone input; turn
left to boost low frequencies, turn right to
boost high frequencies.
20 Control MIC VOLUME
To adjust the volume of the microphone input.
21 Input MIC
6.3 mm jack for connecting a dynamic
microphone.
1
3
4
5
6
7
8
9
10
11
1
13
14
16
17
18
19
20
21
15
2
