Page
6
Version 1.0 May 2021
Setting the Local Time
Note : The oven only operates after the local time has been set.
When the oven is first connected to power, icon flashes automatically.
•
Use the “+” and “-” button to increase or decrease the value in order to set the local time.
•
Wait for approximately 5 seconds, flashing stops and local time is set. The oven is now ready to use.
The local time setting may only be changed while the oven is in standby mode, and not working. To change the local
time, press button a few times until icon flashes, and set the time by using the “+” and “-” button.
Setting the Timer
This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when
the set amount of time has elapsed.
•
Press the
button a few times until the
icon begin to flash.
•
Use the “+” and “-” button to increase or decrease the value in order to set the alarm. Maximum setting
range is to 2 hour 30 min.
•
Timer is set when the
icon is no more flashing and stay lit up. Display will now show the remaining
time. Display will show in seconds if the countdown is less than 1 minute. Press
button to see the
local time. When this period of time has elapsed, the buzzer will ring for 2 minutes. Press any button to
cancel to buzzer.
Program Cooking
A cooking function can be selected before or after programming takes place.
Setting Cooking Duration
•
Press the
button a few times until
icon begin to flash.
•
Use the “+” and “-” button to increase or decrease to set the cooking duration.
•
Cooking duration is set when the
icon is no more flashing and stay lit up. Local time is displayed.
•
When the set time has elapsed, the oven will stop cooking and the buzzer rings for 2 minutes. Press any
button to cancel the buzzer.
