1. This function help carry away the accumulated
dirt, bacteria, etc from the evaporator.
2. This function will run about 30 minutes, and it will return to the
pre-setting mode .You can press or "Mode" to cancel
this function during the process. You will hear 2 beeps when it's
finished or cancelled.
3. It's normal if there are some noise during this function process,
as plastic materials expand with heat and contract with cold.
4.We suggest operate this function as the following ambient
condition to avoid certain safety protection features.
5. We suggest operate this function per 3 months.
OPERATING INSTRUCTIONS
SELF-CLEAN function
Indoor unit
Outdoor unit
Temp<30
5 <Temp<30
16
MILDEW function
OPTION
ECO
TURBO
MODE
FAN
MILDEW
Press OPTION at the fist time , select the MILDEW by
pressing the button or until symbol MILDEW
is flashing; Press OPTION again to activate the
MILDEW function, and appears on the display.
Do it again to deactivate this function.
MILDEW
This function enable the air conditioner still blow
airflow about 15 minutes to dry the indoor inner parts
to avoid mildew, when the air conditioner is off.
Note: MILDEW function only available in DRY/COOLING mode
Press OPTION at the fist time , select the CLEAN by pressing the
button or until symbol CLEAN is flashing; Press OPTION again
to activate the CLEAN function, and appears on the display.
Do it again to deactivate this function.
CLEAN
CLEAN
8
heating function(Optional)
8
H
1.Press OPTION at the fist time , select the
8
H
by
pressing the button or until symbol
8
H
is flashing; Press OPTION again to activate the
8 heating
function, and appears on the display.
Do it again or change the mode to deactivate this function.
2.If the air conditioner is standby, this function enable the
air conditioner automatically start heating when the
indoor temperature is equal or lower than 8
, it will return
standby if the temperature is equal or higher than 18
.
8
H
Only can be set in Heating mode
Switch off the air conditioner by pressing