12
Instruction to Operation
12
Note:
In air exchange mode, press Function button or there is not any operation within 5s after the last
button operation, the system will be quit from air exchange setting and current energy-saving data won’t
be memorized.
5.8 Sleep Setting
Sleep on:
Press
Function
button under on-state of the unit into sleep function and then press
Enter/cancel
button to turn on sleeping function.
Sleep off:
During sleep on-state, press
Function
button to go to the sleep function and then press
Enter/cancel
button to turn off this function.
Sleep setting is
3:
Fig.13 Sleep setting
Sleep setting is clear after power failure and then power recovery. There is not sleep function in fan
and auto mode.
Note:
In cooling and dry mode, if the unit with sleep function has run for 1 hour, the preset temperature
will be increased by 1°C and 1°C in another 1 hour. After that, the unit will run at this temperature. In
heating mode, if the unit with sleep function has run for 1 hour, the preset temperature will be decreased
by 1°C and 1°C in another 1 hour. After that, the unit will run at this temperature.
Instruction to Operation
12
Note:
In air exchange mode, press Function button or there is not any operation within 5s after the last
button operation, the system will be quit from air exchange setting and current energy-saving data won’t
be memorized.
5.8 Sleep Setting
Sleep on:
Press
Function
button under on-state of the unit into sleep function and then press
Enter/cancel
button to turn on sleeping function.
Sleep off:
During sleep on-state, press
Function
button to go to the sleep function and then press
Enter/cancel
button to turn off this function.
Sleep setting is shown as Fig.13:
Fig.13 Sleep setting
Sleep setting is clear after power failure and then power recovery. There is not sleep function in fan
and auto mode.
Note:
In cooling and dry mode, if the unit with sleep function has run for 1 hour, the preset temperature
will be increased by 1°C and 1°C in another 1 hour. After that, the unit will run at this temperature. In
heating mode, if the unit with sleep function has run for 1 hour, the preset temperature will be decreased
by 1°C and 1°C in another 1 hour. After that, the unit will run at this temperature.
Instruction to Operation
12
Note:
In air exchange mode, press Function button or there is not any operation within 5s after the last
button operation, the system will be quit from air exchange setting and current energy-saving data won’t
be memorized.
5.8 Sleep Setting
Sleep on:
Press
Function
button under on-state of the unit into sleep function and then press
Enter/cancel
button to turn on sleeping function.
Sleep off:
During sleep on-state, press
Function
button to go to the sleep function and then press
Enter/cancel
button to turn off this function.
Sleep setting is shown as Fig.13:
Fig.13 Sleep setting
Sleep setting is clear after power failure and then power recovery. There is not sleep function in fan
and auto mode.
Note:
In cooling and dry mode, if the unit with sleep function has run for 1 hour, the preset temperature
will be increased by 1°C and 1°C in another 1 hour. After that, the unit will run at this temperature. In
heating mode, if the unit with sleep function has run for 1 hour, the preset temperature will be decreased
by 1°C and 1°C in another 1 hour. After that, the unit will run at this temperature.
Instruction to Operation
12
Note:
In air exchange mode, press Function button or there is not any operation within 5s after the last
button operation, the system will be quit from air exchange setting and current energy-saving data won’t
be memorized.
5.8 Sleep Setting
Sleep on:
Press
Function
button under on-state of the unit into sleep function and then press
Enter/cancel
button to turn on sleeping function.
Sleep off:
During sleep on-state, press
Function
button to go to the sleep function and then press
Enter/cancel
button to turn off this function.
Sleep setting is shown as Fig.13:
Fig.13 Sleep setting
Sleep setting is clear after power failure and then power recovery. There is not sleep function in fan
and auto mode.
Note:
In cooling and dry mode, if the unit with sleep function has run for 1 hour, the preset temperature
will be increased by 1°C and 1°C in another 1 hour. After that, the unit will run at this temperature. In
heating mode, if the unit with sleep function has run for 1 hour, the preset temperature will be decreased
by 1°C and 1°C in another 1 hour. After that, the unit will run at this temperature.
Instruction to Operation
12
Note:
In air exchange mode, press Function button or there is not any operation within 5s after the last
button operation, the system will be quit from air exchange setting and current energy-saving data won’t
be memorized.
5.8 Sleep Setting
Sleep on:
Press
Function
button under on-state of the unit into sleep function and then press
Enter/cancel
button to turn on sleeping function.
Sleep off:
During sleep on-state, press
Function
button to go to the sleep function and then press
Enter/cancel
button to turn off this function.
Sleep setting is shown as Fig.13:
Fig.13 Sleep setting
Sleep setting is clear after power failure and then power recovery. There is not sleep function in fan
and auto mode.
Note:
In cooling and dry mode, if the unit with sleep function has run for 1 hour, the preset temperature
will be increased by 1°C and 1°C in another 1 hour. After that, the unit will run at this temperature. In
heating mode, if the unit with sleep function has run for 1 hour, the preset temperature will be decreased
by 1°C and 1°C in another 1 hour. After that, the unit will run at this temperature.
1.
Aprire il pannello frontale verso l’alto.
2.
Svitare le viti della copertura e rimuoverla.
3.
Far passare i cavi di collegamento dell’alimentazione attraverso il foro sul retro dell’unità interna.
4.
Tutti i cavi devono essere connessi in base allo schema sull’unità.
5.
Inserire i fili di alimentazione nelle appropriate locazioni assicurandosi che le sezioni siano corrette. ricoprire, avvitare
le viti, stringere le connessioni dei cavi.
6.
Coprire il pannello frontale.
7.
Per l’unità refrigerante e riscaldante, i cavi di controllo possono essere collegate tramite gli appositi connettori
NOTE:
Nel caso in cui la lunghezza dei cavi non sia sufficiente, contatta e il negozio autorizzato per acquistare un cavo che sia ab
bastanza lungo; non sono consigliate giunte
•
I cavi elettrici devono essere connessi correttamente, altrimenti una connessione scorretta potrebbe causare il mal-
funzionamento delle parti.
•
Stringere la vite final per evitare perdite.
•
Dopo aver stretto la vite, tirare leggermente il cavo e verifica e che sia saldo.
•
Se la connessione della messa terra non è corretta potrebbero verificars folgorazioni.
•
La copertura deve essere fissat ed i cavi devono essere stretti. Se questo non avviene polvere e umidità potrebbero
entrare e causerebbe incendi o folgorazioni.
•
È necessario installare un interruttore per il controllo magnetico e di calore correttamente dimensionato.
7 - CONNESSIONE DEI CAVI ELETTRICI INTERNI ED ESTERNI
Per permettere un'installazione agevolata del climatizzatore, ci sono due possibili modi di collegare elettricamente le
unità (schemi pag. 22).
1) Fornire alimentazione sia all'unità interna che a quella esterna e collegare le due unità con un cavo bipolare.
2) Fornire alimentazione all'unità esterna e collegare le due unità tramite un cavo bipolare e un cavo di alimentazione
(L-N-TERRA)
Collegamento elettrico unità 12000Btu
Fornire alimentazione all'unità esterna e collegarla all'unità interna tramite cavo 4*1.5
Collegamento elettrico unità con potenza maggiore di 12000Btu
D.CASSETTE-IN12-32 - D.CASSETTE-IN18-32
