EDjunior Dynamometer User Instructions
9
2 Introduction
The EDjunior
TM
(EDjr) electronic dynamometer from Dillon is a force measurement
load sensor and digital readout in one instrument. The EDjr can be used to measure
tension or weight.
This manual covers the setup and operation of the EDjr. General information is covered
in the right column of each page with major sections separated by the black bar shown
above. Subheads appear in the left column along with any special notes, cautions or
warnings.
This manual covers the following:
l
EDjr Description
l
EDjr Setup
l
EDjr Operation
l
Troubleshooting
Be sure to read the safety precautions found in the Safe Operation section.
DANGER: IF YOU OVERLOAD THIS DYNAMOMETER YOU COULD
SUFFER SEVERE INJURIES OR DEATH. THE TOTAL LOAD ON THE
DYNAMOMETER SHOULD NEVER EXCEED THE RATED CAPACITY.
