shows an optional klaxon alarm attached to an
AP dynamometer.
Figure 2.2 AP Dynamometer with optional klaxon
alarm (rear view)
CAUTION: Dillon Dynamometers are not
designed for measurement of dynamic
shock loads and should not be subjected
to sudden force. Load or weight should be
applied in a gradual manner to avoid
damaging the Dynamometer. Torque loads
applied to the dynamometer should be
relieved or avoided.
The klaxon alarm is rated at 80db(A) @
0.6 meters (2 feet).
To replace batteries: Remove
four screws and back panel
from the klaxon alarm, remove
old D-cell batteries, replace
with two new batteries.
Replace back panel.
Test Button:
Press to test horn function
Klaxon alarm is
rated at 80db(A) @
0.6 meters (2 feet).
Needle bearing
inside deflection
beam.
Zero adjustment knob
