manualshive.com logo in svg

Dillenger Hunter BBS 2015, User Manual

Share
Download
Dillenger Hunter BBS 2015 User Manual Download Page 20

BBS SHIELD INSTALLATION CONTINUED...

Now you should insert the BBS shield in between the two big washers as shown the the 
photos below.

After this you must position the assembly so that it will mount to your bike easily. Make 
sure the nut is tightened at the end of the cutout of the mounting plate and that the 
angled part of the mounting plate is facing up. The correct position of the mounting plate 
is shown in the first photo below. 

You must also ensure that the mounting assembly is tightened at the bottom of the cutout 
in the BBS shield. This is shown in the second photo below.

Next, you can put two washers on the smaller bolt shown in the first photo below. Insert 
this bolt into the angled part of the mounting plate as shown in the second photo below. 
Two more washers should now be added to the bolt as shown in the third photo below. 
Now you should insert the skinniest bolt (shown in photo 4). 

Place the skinny bolt in the BBS shield and the put the washer followed b the long space 
onto the bolt. 

20

Summary of Contents for Hunter BBS 2015


































Reviews:

No comments

Brands by name

Popular brands

Load more brands