Digium TE800 Series, User Manual

Page: 58 / 75

Chapter 4: Troubleshooting
How can I enable more features?
To view all of the options available to add to your dial plan, type the
following commands from within Asterisk:
*CLI> core show applications
*CLI> core show functions
Digium also offers services to help configure and add features you might
need. Contact Digium Technical Support (+1.256.428.6161) for more
information.
Common Fixes for all cards
1. Check to see if the X Window System (e.g. X.Org Server) is running
by entering the following:
# ps aux | grep X
If the X Window System is running, stop the application since it may
cause a conflict with Asterisk.
2.
Check to see if your PATA IDE hard drives are running with DMA
levels set. Advance user can perform an
hdparm on your hard drive
interface.
Use hdparm with caution as the man page states that hard drive
corruption can occur when using incorrect settings. Please
review the man page for hdparm and make sure you understand
the risks before using this tool.
Digium, Inc. Page 58