Release 1.0
Digium, Inc.
Page 31
Chapter 2: Card Installation
1.
Check your
lspci
PCI device listing. Boot the computer into Linux.
After the machine has loaded, log in and execute the following:
# lspci -n
Confirm your
lspci
PCI device listing by scanning for the following
information in the output screen:
0000:01:0e.0 ISDN controller: Unknown device
d161:<card identifier>
In the device listing shown above, <card identifier> will be populated
with one of the identifiers listed in the table below.
Table 1: Card Identifiers
A Digium TE400 Series (TE420B/TE420/412P/410P/407P/405P)
ISDN Controller should be identified. If a controller is not identified,
then your machine is not PCI 2.2 (or higher) or PCI Express
compatible and the card will not work with your equipment.
Model
Identifier
TE420B
TE420
TE412P
TE410P
TE407P
TE405P
0420
0420
0410
0410
0405
0405
