Digium, Inc.
Page 55
Chapter 4: Troubleshooting
I am still having problems and the telco tells me it is my equipment.
The first thing to do in this situation is to test your equipment.
1.
Plug in a loopback cable. (A loopback cable is a cable that has pin 1
going to pin 4 and pin 2 going to pin 5.) Plug the cable into the span
and wait for its LED to turn green.
2.
Stop Asterisk and edit
system.conf
by removing the lines defined for
your card and replacing them with the following:
span => 1,0,0,esf,b8zs
clear = 1-24
Or if you have an E1 span:
span => 1,0,0,ccs,hdb3
clear = 1-31
3.
Navigate to the tools/ directory in your DAHDI complete source
directory and type:
# make tests
Followed by:
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
