Digium 1TC400BLF, User Manual

Page: 26 / 43

Digium, Inc. Page 26
Chapter 2: Card Installation
4. Confirm that the card was started successfully by running the dmesg
command.
# dmesg
The end of the output should look similar to the following:
dahdi_transcode: Loaded.
wctc4xxp: tc400b0: Attached to device at 0000:00:0a.0.
wctc4xxp: tc400b0: (G.729a / G.723.1) Transcoder support LOADED (firm ver
= 6.12)
wctc4xxp: tc400b0: Installed a Wildcard TC: Wildcard TC400M
dahdi_transcode: Registered codec translator 'DTE Encoder' with 92
transcoders (srcs=0000000c, dsts=00000101)
dahdi_transcode: Registered codec translator 'DTE Decoder' with 92
transcoders (srcs=00000101, dsts=0000000c)