V. Driver Installation
a. Under Windows 7/8/Vista/XP/2000: no need driver
Under system Windows 7/8/Vista/XP/2000, system will automatically detect the new hardware and
finish the setup! Then an
icon will appear on the right-bottom area of the system toolbar as below:
Congratulations to enjoy this product now!
b. Setup mode under Mac OS system
If your system is Mac OS 10.4 or above, the system can detect the hardware and install it directly, if
your system is Mac OS8.6, you have to download setup “USB Mass Storage Support 1.3.5” from
Software Support.
Website: http://www.apple.com/support
VI. Power Supply
Usually under USB mode bus-power can support hardware work normally, If your HDD needs more
than 500mA to function or it works unstably while using only the USB Bus-power, you should apply the
external power supply to this unit:
Connect the USB extended power jack
:
1. Connect the HDD installed enclosure to your computer's USB/FW port with the USB2.0
multiple/FW cable
2. Connect the red color of USB extended power jack which been mounted on the enclosed USB2.0
multiple cable to your computer's the other USB port
1
To external box mini USB port
2
DATA USB Connector
3
Color: RED
4
Power USB Connector
