3
Hardware Installation
General instructions for installing the card are provided below. Since
the design of system may vary, refer to your system’s reference manual
for further information, if needed.
1.
Power off your notebook computer.
2.
Insert the eSATA CardBus Adapter into the Type II PC Card slot
of your notebook computer. Make sure it is inserted all the way in
for a solid connection.
3.
Power on your notebook computer.
Driver Installation
For Windows® 2000
1.
At
Found New Hardware Wizard
, click
Next
.
2.
Select
Search for a suitable driver for my device(recommend)
then click
Next
.
3.
Insert the driver CD, check
CD-ROM drives
, uncheck the other
boxes, click
Next
, then click
Next
again.
4.
If the
Digital Signature Not Found
message appears, click
Yes
.
Our driver has been thoroughly tested for stability and
