8
Troubleshooting
Problems
Causes
Solutions
1.
No signal output after
correct connection in the
same room
Maybe the sender and
receiver are not paired
correctly
To rebuild Sender and Receiver
connection: Please follow the setup
procedure from “
Installation for
DS-55315 (receiver unit)
”
2.
No signal output after
correct connection in
different rooms
The distance can`t reach
100m due to the signal loss
via pass through the solid
walls.
When pass through a solid wall
(thickness under 30 cm), the signal
will loss 30 % of the original signal
and the distance will shorter than
70 m; if pass through two or more
solid wall, the distance will shorter
than
20 m. Please get shorter distance at
pass through solid wall application
3.
The video transmission is
not stable or the distance
is shorter than described
Maybe there have some
same band Interference
sources at 5 GHz effect the
extender's signal
transmission.
Please place the product closer
when there have same band
Interference sources or remove the
Interference sources
Important safety instructions
Please read the following safety instructions carefully before installation and operation:
1.
Observe all warnings and instructions concerning this device
2.
Do not expose the device to rain, moisture, vapours or liquids
3.
Do not insert any objects into the device
4.
Do not attempt to repair the unit yourself or open the cabinet. Risk of electric shock!
5.
Ensure adequate ventilation to prevent damage due to overheating
6.
Turn off the power supply and make sure the environment is safe before installation
7.
In the event of thunderstorms, there is a risk of lightning strike and damage to connected
electrical equipment due to overvoltage
8.
Do not install this device during a thunderstorm
9.
Disconnect the device from the connected electrical appliances during a thunderstorm
10.
Use the device inside buildings only
11.
Return the device to your dealer in case of repair
12.
Dust, moisture, vapours and strong cleaning agents or solvents can damage the device
13.
Disconnect the device from the power supply and the connected devices before cleaning
14.
Clean the device with a lint-free cloth