FAQ
Q:
No image or audio output on display?
A:
1)
Please check whether display on standby mode;
2)
Please check whether display HDMI signal channel in accord
with HDMI input port
3)
Please check whether “LINK” LED on RX side keeps on, LED flash
means RX does not receive signal from TX.
4)
Please check whether signal indicator LED on TX turns blue, LED
on red means no input signal
5)
Please check whether input resolution is supported by this
product.
Q: Image
unstable?
A:
1.
Press the “LENGTH” or “RESET” button on the transmitter to
re-identify the signal;
2.
Please pull & plug CAT cable on corresponding port to
reconnect.
Q:
Only partial ports have output?
A:
1.
Please check whether CAT cable or HDMI cable connected
correctly
2.
Press the “LENGTH” or “RESET” button on the transmitter to
re-identify the signal;
3.
Please pull & plug CAT cable on corresponding port to
reconnect.
