2
Operations
Active console selection by Push Button
You can press the push button on the local unit (transmitter) to change the active
console operation. There are three different types of active console configurations:
1.
Local Console Only
You can operate the system only from the local unit (transmitter)
2.
Remote Console Only
You can operate the system only from the remote unit (receiver)
3.
Both Consoles (Local + Remote)
You can operate the system through local unit (transmitter) and
remote unit (receiver) synchronization
The default configuration is “Both Consoles” mode. Once you change the active
console configuration, it will be saved and not be affected by a unit reset.
The selected active console can be shown via “Selected Indicators”
by the LED indicators. In this context, please refer to the description of the next
sections.
