4
4.0 PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the signal input(s),
output(s) and power requirements.
5.0 CONNECTION AND
OPERATION
Before installation, please make sure all devices you wish to connect have been turned off.
1) Connect the DVI input from source device to this Converter. (Input cables are optional)
2) Connect the VGA output of this product to the display device.
3) Power on all connected devices, choose the input of the display device to its VGA channel.
6) The image does not need to be adjusted. This Converter will position it automatically.
Note: DVI to VGA conversion may existing the following compatibility problems
1. If the VGA port of Display doesn’t support Refresh Rate at 50HZ, the connected Display
will have no image when the DVI Source setting at 50 Hz.
2. If the VGA port of Display doesn’t support resolution at 720p, 1080i and 1080p, the connected
Display will have no image when the DVI Source setting at 720p, 1080i and 1080p.
3. If the connected VGA Display doesn’t support interlaced resolution, it will have no image
when the DVI Source setting at 1080i, 480i or 567i.
Our converter fully supports the above formats. These common problems are mainly
coursed by Displays not supporting these formats.
5.1 CONNECTION DIAGRAM
1 DVI
cable
2 VGA
cable
3 PC
4 DVI to VGA Converter DS-40101
5 Monitor
