6
LED indicator:
LED
Color
Function
PWR
Green Off: No Power supply
Light: Indicates the switch has power
LNK/
ACT
Green
Off: No device is connected to the
corresponding port.
Light: Indicates the link through that port is
successfully.
Blink: Indicates that the Switch is actively sending
or receiving data over that port.
PoE
Orange
Off: No PoE powered device (PD) connected
Light: There is a PoE PD connected to be port,
which supply power successfully.
Blink: Indicates port abnormal power supply
Max
Green Off: PoE power is less than 80% of total power.
Light: PoE power above 80%.
DIP Switch
The DIP switch located on the left panel.
Default:
the factory default mode, can normal communication between
port 1~18/1~26.
VLAN:
1-16/24 port can be isolated each other but 1-16/24 port can
connect to 17~18/25~26 port after open VLAN to stop broadcast storm
to increase forwarding rate of frame.
CCTV:
Up to 250m PoE distance allows you to expand you network via
Ethernet cable but where you want to fix device such as IP Cameras.
Note:
After change the mode, there is no need to restart manually to make the
corresponding configuration take effect.
