Please follow below the installation steps:
1. Please turn off the signal power and display device power before
installation; installation with power will damage the transmission
equipment
2. Use network cable connect PoE IP camera and 1
～
8 down link ports of
product respectively
3. Use a network cable connects equipment up link port and NVR or
computer
4. Turn on the power of the equipment
5. Check if the installation is correct, equipment is in good condition, the
connection is stable, then provide power for system
6. Ensure the Ethernet equipment with power and work properly.
Specification
Item
Description
Power
Power Supply
Power Adaptor
Voltage Range
DC48V~54V
Consumption
＜
5W , PoE output < 120W
Ethernet
Speed
1-4 port:Default:10/100Mbps;
VLAN:10Mbps;
UPLINK:100Mbps
Transmission
Distance
1-4 port:Default:0
～
100m;
VLAN:0~250m;
UPLINK:100m
Network Switch
Ethernet Standard
IEEE 802.3/802.3u/802.3af/at
Backplane Bandwidth
1.8G
Packet Forwarding
1.34Mbps
Packet Buffer
768K
MAC
2K
Status Indicator
Power Light
1pcs(Red)
Ethernet Port Light
2pcs(Yellow & Green) on RJ45,
Yellow indicates PoE, Green indicates Link/Act
VLAN
1pcs(Green), green indicates VLAN
Protection
Level
Pluse Group
Level 2
Standard: IEC61000-4-4
ESD
1a Contact Discharge Level 3
1b Air Discharge Level 3
Standard: IEC61000-4-2
Anti-thunder Level
Level 3
Standard: IEC61000-4-5
Working
Environment
Working Temperature
0
℃
~55
℃
Storage Temperature
-40
℃
~85
℃
Humidity(Non-
0~95%
Mechanical
Dimension(L*W*H)
200mm×101.8mm×27mm
Out Shell
Galvanized Sheet
Color
Black
Weight
500g
Stability
MTBF
≥
50,000h
Product is subject to change without prior notice.