6
Wall-mounted installation
Fasten 2 screws in the wall at the distance of the switch mounting holes as shown in
the drawing. Then you can mount the switch on the wall by hooking the screws into
the mounting holes.
Turn on the switch
Please connect the AC power cord into the rear of the switch and to an electrical
outlet (preferably one that is grounded). When the switch is power on, the LED
indicators flash momentarily for one second, which represents a resetting of the
system. The Power LED indicator turns on green.
Note:
Please confirm the voltage is correct before power on; otherwise the switch
will be damaged. (The power input is: 100V-240Vac, 50/60Hz.)
