FDX/COL
On
Fiber port works in the full duplex mode
Off
Fiber port works in the half duplex mode
SD
On
Fiber signal is detected
Off
Fiber signal not detected
Technical Specifications
1.
Standard Protocol: IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
2.
Connector: one RJ-45 connector, one SC/ST fiber connector.
3.
Operation mode: full duplex mode or half duplex mode
4.
Power supply parameter: outside: 5V DC 1A
Built-in: 110-265V AC 48VDC
5.
Environmental temperature: 0°C-60°C
6.
Relative humidity: 5%-90%
7.
TP cable: Cat5 UTP cable
8.
Fiber: 50/125, 62.5/125um multi-mode fiber; 9/125, 10/125um single-mode
fiber.
9.
Dimensions:
External power supply: 26mm x 71mm x 94mm
Built-in power supply: 40mm x 110mm x 140mm
Cautions:
1.
This product is suitable for indoor application.
2.
Put on the dust cover of fiber interface when not used.
3.
It is forbidden to stare at the TX fiber-transfer end with naked eyes.
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the
requirements of Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive
2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested
by post under the below mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living
environment. In this case, the user can be requested to undertake appropriate measures to
prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
