background image

 

Copyright Statement 

Our company reserves all copyrights of this document. Any 

reproduction, excerption, backup, modification, transmission, 

translation or commercial use of this document or any portion of 

this document, in any form or by any means, without the prior 

written consent of our company is prohibited. 

 

Exemption Statement 

This document is provided "as is". The contents of this document 

are subject to change without any notice. Please obtain the latest 

information through our company website. Our company 

endeavors to ensure content accuracy and will not shoulder any 

responsibility for losses and damages caused due to content 

omissions, inaccuracies or errors. 

 

Before you install and use this product, please read this manual 

carefully for full exploiting the functions of this product. 

 

1.

 

Product Introduction 

The Switch is 8 ports 10/100/10 2 ports 100/1000Mbps 

SFP Slots Unmanaged Ethernet Switch. This switch is a design of 

high integration level, exquisite, portable, easy to operate, which 

is suitable for the small and medium office and home network. 

The switch provide you with a simple, economic, standard and 

high performance of network application plan, it is ideal choice to 

promote the department and working group performance. It 

provide simple and understood LED indicator light on the front 

panel, so that you can quickly judge the working state of the 

switch, and help to diagnose the network failure. 

 

 

 

Summary of Contents for DN-80067












Reviews: