Then this is the end of the Setup Wizard. You should now be able to access
Internet via WiFi connection.
LAN Settings
Please click
“
Network
Lan Settings
”
located at the web management
interface, the following message will be displayed on your web browser:
IP Address:
Enter the IP address of your Router or reset it to the
factory default as
192.168.0.1
Subnet Mask:
An address code that determines the size of the network.
Normally use 255.255.255.0 as the subnet mask.
DHCP Type:
Server, Client or Disable
Note:
1) If you change the IP Address of LAN, you must use the new IP
Address to login the Router.
2) If the new LAN IP Address you set is not in the same subnet, the IP
Address pool of the DHCP server will change accordingly at the same
time
，
while the Virtual Server and DMZ Host will not take effect until
they are re-configured.