11
/
24
2.2.2 Using WPS Connect
Wi-Fi Protected Setup (WPS) is the latest wireless network technology which allows
wireless network setup to become very simple. If you have WPS-enabled wireless
access point and you want to establish a secure connection to it, you don’t have to
configure the wireless access point and setup data encryption by yourself. All you
have to do is go to the WPS setup page of this wireless card, click a button, and then
press a specific button or enter a set of 8-digit code on the wireless access point you
wish to establish a secure connection - just three simple steps!
For older wireless access points, it’s possible to perform a firmware upgrade to
become a WPS-enabled access point. Since they may not have a hardware button to
press for WPS setup, you can use an alternative WPS setup method - input the pin
code. Every WPS-compatible wireless network card support pin code configuration
method; you can just input the code to wireless access point, and the wireless access
point and wireless network card will do the rest for you.
This wireless network adaptor is compatible with WPS. To use this function, the
wireless access point you wish to connect to must support WPS function too. Please
follow the instructions to establish secure connection between WPS-enabled wireless
access point and your wireless network card.
This wireless network card supports 2 kinds of WPS:
PIN code
Push-Button.
