Setup Wireless Projector Server
Please follow following steps to setup projector server
Stick the foot pads on the 4 locations
indicated on the picture shown below if
you plan to put the projector server on the
desk or other horizontal places.
You can skip this step if you plan to hang
the projector server on the wall.
Insert supplied antenna to both
antenna base and fasten antenna
with your finger (hold antenna base
and turn it by clockwise direction to
fasten it to projector server).
You have to fasten all 2 antennas to
projector server.
Insert network cable to network
connector located at the back of
projector server. You can skip this
step if you plan to use wireless
network only.
Insert IR extender into IR extender
connector.
